Tables are commonly used household items. Most of the existing tables are fixed, and there is no inconvenience in home life, but for travel, it is difficult to carry due to its large size, so everyone can use folding tables. It brings a lot of convenience to our travel. Let me show you how to make a folding table.
The desktop and the bracket can be separated, the desktop can be divided into 4 pieces, and the middle is connected by mortise and tenon. Composed of different sizes of casings, the large casing is sleeved outside the small casing, the small casing can be expanded and retracted in the large casing, the side wall of the large casing is installed with fastening screws, which can fix the small casing, and the side column is large. There is a sliding sleeve on the outside of the casing, and a connecting plate is installed in the middle of the large casing of the central column. Two arc-shaped through grooves are correspondingly opened on the connecting plate, and two connecting bolts are inserted in each arc-shaped through groove. Sliding in the slot, each bolt is connected to the U-shaped hinge, the other end of the U-shaped hinge is connected to the support rod, the U-shaped hinge and the support rod are provided with positioning pins, and the other end of the support rod is connected to the sliding sleeve on the side column, the support rod The side column is connected with a support piece, and the other end of the support piece is connected to the positioning screw of the sliding sleeve through the hook. The hinge rotates up and down around the center column, and after the hook of the support piece is separated from the positioning screw of the sliding sleeve, the side column can rotate around the support rod.
When in use, the support rod is in a crisscross state, and the connecting bolts in the arc-shaped through groove are in a fastened state to prevent the support rod from swinging horizontally. Insert the positioning pin to prevent the support rod from swinging up and down. On the screw, the side column is prevented from swinging, the middle column and the side column are in a raised state, and four small tabletops are connected by mortise and tenon to form a large tabletop and placed on the column. After use, disassemble the table top, loosen the fastening screws on the column, retract the small casing into the large casing, lower the height of the bracket, loosen the connecting bolts in the arc-shaped through groove, make the poles close together, and take them out. The positioning pin between the lower U-shaped hinge and the support rod is released from the hook of the support piece, the rotating side column overlaps the support rod, and the rotating side column and the support rod are moved closer to the center column. At this time, the support is in a retracted state.
Since the utility model is folded for many times, the volume of the travel table in the folded state is greatly reduced, which is convenient to carry, and at the same time, the height of the five uprights can be adjusted independently, which is convenient for the travel table to be used in uneven terrain.
There are also some folding tables on the market now. Usually, the tabletop is made to be detachable from the bracket and the bracket can be cross-folded, which is very convenient to carry, and everyone can travel lightly. Well, about the production method of the folding table, the editor will introduce these to you. I hope the content of the editor will be helpful to you.
